OSI Model Most Frequently Asked Interview Questions & Answers
OSI model interview questions that are asked frequently, you’ll get to know here. Now, let us start with What is OSI and then we will get to the best possible OSI model interview questions. OSI means Open System Interconnection. You can find 7 layers in the OSI model and each layer includes a different capability. OSI model helps networking professionals in understanding information flow from source to destination. Even though the OSI model does not perform any function in the networking process. All devices and software applications use the OSI model to explain data flow between source and destination.
Can you list the layers of the OSI reference model?
There are 7 OSI layers:
- 1) Physical Layer
- 2) Data Link Layer
- 3) Network Layer
- 4) Transport Layer
- 5) Session Layer
- 6) Presentation Layer
- 7) Application Layer
OSI Model Interview Questions and Answers
Read the following OSI model interview questions and answers to become ready to sit for an interview for the top MNC. These OSI model interview questions and answers are enclosed with skilled knowledge, and it helps you to get the job in the domain hassle easily in the short interval.
- In your view is there any alternative model to the OSI model?
TCP/IP could be the alternate model that also explains the data flow in the network. It is a less complicated representation compared to the OSI model but contains fewer details of protocols compared to the OSI model.
- How TCP protocol differs from UDP protocol?
|Transmission Control Protocol||User Datagram Protocol|
|Connection-Oriented Protocol||Connection Less Protocol|
|Reads data as streams of bytes and therefore the message is transmitted to segment boundaries.||UDP messages consist of packets that are sent one by one. It also checks the integrity at arrival.|
|High reliability more transmission time||Low reliabilityLess transmission time|
|TCP rearranges data packets in a specific order.||UDP protocol doesn’t have a fixed order because all packets are independent of each other.|
|Three-way handshake||No handshake|
|The speed for TCP is slower.||UDP is faster as the recovery of error is not attempted.|
|The header size is 20 bytes||The header size is 8 bytes.|
|Acknowledgement segments||No Acknowledgment segments|
|TCP does error checking and also error recovery.||UDP performs error checking, but it discards incorrect/invalid packets.|
|TCP is reliable because it guarantees the delivery of knowledge to the destination router.||The delivery of deets to the destination cannot be guaranteed in UDP.|
|TCP provides extensive error checking mechanisms because it provides flow control and acknowledgement of data.||UDP has just one error checking mechanism that’s used for checksums.|
- Which layers perform error detection and flow control?
On receiving and while transmission of information, Layer 2 – Data Link layer decodes and encodes data into bits. The data link layer can be further divided into two sublayers: The Media Access Control (MAC) layer and the Logical Link Control (LLC) layer. This layer also does the task of error checking and flow control.
- What is the difference between half-duplex and full-duplex?
In a half-duplex, information can flow in both directions although not simultaneously. During full-duplex, information can flow in both directions simultaneously.
- What are the different protocols of each layer in the OSI Model?
|Layer 1||Physical||RS232, 100BaseTX, ISDN, 11.|
|Layer 2||Data Link||RAPA, PPP, Frame Relay, ATM, Fiber Cable, etc.|
|Layer 3||Network||IPV5, IPV6, ICMP, IPSEC, ARP, MPLS.|
|Layer 4||Transport||TCP, UDP|
|Layer 5||Session||NetBIOS, SAP|
|Layer 6||Presentation||MPEG, ASCH, SSL, TLS|
|Layer 7||Application||SMTP, HTTP, FTP, POP3, SNMP|
- What do you understand about TCP/IP Model?
Transmission Control Protocol / Internet Protocol is the full form of TCP/IP. These are a couple of protocol layers that were created to make data exchange possible on various kinds of computer networks, also referred to as heterogeneous networks.
- What is HTTPS and which port does it use?
HTTPS is just a Secure HTTP. HTTPS is employed for secure communication over some type of computer network. HTTPS provides authentication to the websites that prevent unwanted attacks. In bi-directional communication, the HTTPS protocol encrypts the communication so the tampering of the info gets avoided. With assistance from an SSL certificate, it verifies if the requested server connection is just a good connection or not. HTTPS uses TCP with port 443.
- What is Network Layer all about under the OSI reference model?
The Network layer is mainly responsible for data routing, packet switching, and network congestion control. The routers operate under this layer.
- Explain the main importance of the Physical Layer in the OSI Model.
The physical layer’s conversions are done from the data bits to the electrical signal, and vice versa. This is where network devices and cable types are thought and set up.
- Explain the functions of the OSI Session Layer.
This layer offers the protocols and means for just two devices on the network to communicate with each other by holding a session. This includes creating the session, managing information exchange during the session, and the tear-down process upon termination of the session.
- What role does OSI play in computer networks?
OSI (Open Systems Interconnect) serves as a guide model for data communication. It is made up of 7 layers, with each layer defining a particular facet of how network devices connect and speak with one another. One layer may handle the physical media used, while another layer dictates how data is transmitted throughout the network.
- What protocols come under the Application layer of the TCP/IP?
These are the protocols under the TCP/IP Application layer:
- What is SMTP?
SMTP is short for Simple Mail Transfer Protocol. This protocol deals with all internal mail and provides the required mail delivery services on the TCP/IP protocol stack.
- What protocols fall under the TCP/IP Internet Layer?
4 protocols are being managed by this layer.
- What are the differences between MAC addresses and IP addresses?
|MAC Address||IP Address|
|MAC address is Media Access Control Address.||IP address stands for Internet Protocol Address.|
|It consists of a 48-bit address.||It consists of a 32-bit address.|
|MAC address comes under the link layer of the OSI model.||IP address comes under the network layer of the OSI model.|
|It is referred to as a physical address.||It is referred to as a logical address.|
|You can redeem the MAC address of any device using the ARP protocol.||You can redeem the IP address of any device RARP protocol.|
|Classes are not used in MAC addresses.||IP addresses consist of IPv4 that use A, B, C, D, and E classes.|
- Can you explain why the layers of the OSI model are important to the network administrator?
The Layers of the OSI Model are important for the network administrator in this manner-
i. To troubleshoot network problems by verifying the functionality of each layer.
ii. In many cases it requires the network administrator to isolate at which layer the network problem occurs.
- What happens in the presentation layer?
Encryption. The presentation layer encrypts data to be sent throughout the network and decrypts it so that it could be accessed by the application form layer on the receiving end.
- What are Unicast, Multicast, and Broadcast?
Unicast communication is from a device on the network to another device on the network.
Multicast communication is from a device on the network to many, but not all, devices on the network.
Broadcast communication is from devices on the network to all devices on the network.
Read about Characteristics of OSI Model and What is a Botnet ( Cyber security trending topics)